User manual BLUETREK G2

[. . . ] This does not imply that Industry Canada approved the equipment. Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license. BEFORE USING YOUR HEADSET FOR THE FIRST TIME You must charge it continuously for about 8 hours, until the red indicator light turns off. Please refer to the "Charging the BLUETREK® G2" section of this manual. Please refer to the "Pairing BLUETREK® G2" section of this manual. Introduction The BLUETREK® G2 headset is a wireless headset based on the Bluetooth® technology. [. . . ] Make sure the speaker is properly inserted into your ear. Switching the BLUETREK® G2 ON and OFF Switching BLUETREK® G2 ON When your headset is off, press and hold the TALK button for about 2 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. To check if your headset is ON, press once on the TALK button. If the indicator light flashes blue, it means your headset is ON. Switching BLUETREK® G2 OFF When your headset is on, press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard in the speaker then release the TALK Button. · · Making a call *Mobile phone with voice recognition . Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone's manual . When there is no incoming or active call, press once on the TALK button . Wait for the audio signal sent by the mobile phone (generally a short tone). Speak the name of person you wish to call. Make sure both the headset and the mobile phone are ON and in stand-by mode. Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established. *This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www. bluetrek. com. to find out more. Pairing the BLUETREK® G2 Before using the BLUETREK® G2 headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate. Place the BLUETREK® G2 and your mobile phone within 0. 3 meter (1 foot) from each other. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth® mobile phone user manual). When the BLUETREK® G2 is switched off, press and hold the TALK button for about 7 seconds until the indicator light flashes red and blue alternatively. And a sound can be heard in the speaker. Once the mobile phone detects the headset, a "BlueTrek G2" message will be displayed. Follow the phone instructions to accept the pairing. [. . . ] Keep your headset away from dust and dirt. Do not let children play with your headset, since it contains small parts that could become detached and create a choking hazard. Check the regulation in your area if you plan to use your headset while driving. Turn off your headset before boarding an airplane. Transferring a call from BLUETREK G2 to the mobile phone During an active call, press the TALK button for about 2 seconds. [. . . ]