User manual BLUMAX SPEECH 002

[. . . ] Read also the user guide for your phone, which provides important safety and maintenance information. Keep the car kit out of reach of small children. Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. [. . . ] Charging the battery fully may take up to 2-3 hours. When the battery is fully charged, the red indicator light turns off. Disconnect the car kit from the charger. The fully charged battery has power for up to 4 hours of talking time or up to 30 days of standby time. However, the talking and standby time may vary when used with different mobile phones, -2- products that use a Bluetooth connection, usage settings, usage styles, and environments. Switch on and off the car kit To switch on, Press and hold the , , MFB" multi-function button until there is a tone prompt and the blue LED flashes 5 times. To switch off, press and hold the , , MFB" for 4 seconds until the red LED flashes 5 times. Pair the car kit with a compatible phone 1. Press and hold the , , MFB" until the blue and red light flashes alternately and there is a tone prompt. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. Select the car kit (Speech 002) from the list of found devices. Enter the pass code 0000 to pair and connect the car kit to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the car kit with your phone once. [. . . ] Check the user manual of your mobile for details. Adjust the volume Press volume+ or volume- key to increase or to decrease the volume during a call. Mute During a call, press and hold mute button for about 2 second to mute the MIC, the same operation to withdraw from the MIC mute state. LED indicator status: Switch on: The blue LED flash five times Standby state: Blue LED flashes once every 3 sec. [. . . ]