Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BOLEX H9. We hope that this BOLEX H9 user guide will be useful to you.
Lastmanuals help download the user guide BOLEX H9.
Detailed instructions for use are in the User's Guide.
[. . . ] With its quick release device it can be mounted or removed in seconds. In any case, you will find the adapter necessary if you use a Bolex tripod, which is equipped with the same quick release system. [. . . ] The adapter screws into the forward threaded hole in the camera base. If necessary, tighten the small screw (d) (fig. 2) so as to eliminate any possible source of play between the adapter and the camera base. Fitting the grip on to the camera catch (e), then that the When this lead is connected the camera will be started by depressing the trigger. To draw back the lead, depress the safety-catch (n), (see fig. As the switch does not operate until the trigger is fully depressed, it is preferable to reduce the travel of the trigger by raising lever (j). Let go of the trigger If you own a Vario-Switar The diaphragm pre-selection device grip, by using a flexible cable: 1. (available separately) on to the and screw one end of the cable into the grip (fig. Screw the other end of the cable Two settings are possible: 1. Depending on the adjustment of the cable when lever (j) is raised, the movement of the release can be reduced (for normal running) or increased, in order to be able to engage the continuous running position (for instance, to end a scene with a fadeout, using the RX-fader). When you have found the tightening the screw (k). If you own a Vario-Switar You can also operate the diaphragm pre-selection device from the grip, without using the electric motor, by using the flexible cable. Screw one end of the cable into the thread on selection device and the other end into the grip. The length of the cable is correctly adjusted when there is absolutely no play and when the slightest pressure on the hardgrip trigger moves the pre-selection plunger of the lens. [. . . ] Screw one end of the cable into the thread on selection device and the other end into the grip. The length of the cable is correctly adjusted when there is absolutely no play and when the slightest pressure on the hardgrip trigger moves the pre-selection plunger of the lens. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BOLEX H9
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BOLEX H9 will begin.
