User manual BONTEMPI AZ 1250

[. . . ] Socket for connecting the power cord (on the back of the device). AC~ Radio unit ANTENNA STOP/BAND UP 9 DOWN 8 PROG/ MEM Telescopic antenna for FM (VHF) reception. Frequency band switch MW (medium wave) and FM (VHF). Press briefly to change the frequency up and down in steps. Press and hold down to start a forward or reverse search. [. . . ] Important: The wires in the mains lead are colour coded in accordance with the following code: BLUE ­ NEUTRAL BROWN ­ LIVE As the colours of the wires in the mains lead of your appliance may not correspond with the coloured marking identifying terminals in your plug, proceed as follows: Connect the BLUE coloured wire to plug terminal marked with the letter "N" or coloured black. Connect the BROWN coloured wire to the plug terminal marked with the letter "L" or coloured red. In no circumstance must any of the wires be connected to the terminal marked with the letter "E", earth symbol "z", coloured green, or green & yellow. Replacement mains lead sets can be obtained from your local dealer, or by contacting Grundig Consumer Relations (01788 570088) Moulded 3-pin lead set, suitable for UK use: Ref: Leadset UK 8290-991-224 Moulded 2-pin Euro lead set, not suitable for UK use: Ref: Leadset Euro 8290-991-316 22 CARE AND SAFETY ________________________________________ To ensure that this device provides you with long-term satisfaction and enjoyment, please observe the following instructions. This device is designed for the playback of audio signals. Protect the device, the CDs and cassettes from rain, moisture (dripping or splashing water), sand and heat. Do not leave it next to heaters or inside parked cars in the sun. Make sure there is adequate ventilation when positioning the device. There must be a free space of at least 10 cm behind the device. Do not place objects on the ventilation slots. Do not place any objects containing liquids (for example, vases) on the device. ­ The device searches for up to 10 radio stations and then saves them. After the search has finished, the station stored in position 01 can be heard. 24 RADIO MODE _________________________________________________ Automatic station search 1 2 Select the frequency band (FM or MW) using »STOP/BAND«. Activate the station search by pressing »DOWN 8« or »UP 9« until the frequency display changes to rapid run-through. ­ The search stops when a programme is found. Manual station search 1 To move the frequency forward in steps, briefly press »DOWN 8« or »UP 9« several times. ­ The frequency changes in steps of 50 kHz. Storing stations on station positions Up to 10 stations in the FM band and up to 10 stations in the MW band can be stored. 1 2 3 4 5 6 Select the frequency band (FM or MW) using »STOP/BAND«. Press »DOWN 8« or »UP 9« to select the station. Press »PROG/MEM« briefly to activate the memory function. Select the desired station position with »REPEAT/MEM UP« or »RANDOM/MEM DOWN«. Press »PROG/MEM« to save the station. To store more stations, repeat steps 2 to 5. [. . . ] ­ The whole CD is played back repeatedly. To quit the function, press »MODE« until the repeat indicator goes out. ENGLISH 29 MP3 MODE (RCD 1420)_______________________________ Playing back files in random order (Random) 1 2 3 In Stop mode, press »MODE« until »RND« appears in the display. Press »PLAY/PAUSE II« to start random playback. [. . . ]