Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BONTRAGER TRACK WHEELS. We hope that this BONTRAGER TRACK WHEELS user guide will be useful to you.
Lastmanuals help download the user guide BONTRAGER TRACK WHEELS.
Manual abstract: user guide BONTRAGER TRACK WHEELS
Detailed instructions for use are in the User's Guide.
[. . . ] If you do not understand the information in this manual, or you have a question about your track wheel system that this manual does not cover, consult your Bontrager dealer. If you have a question or problem that your Bontrager dealer can't handle, contact us at: Bontrager Wheelworks and Components (800) 369-8735 Attn: Customer Service http://www. bontrager. com 801 W. Madison Street Waterloo, Wisconsin 53594
This wheelset, like all track wheels, is designed to be used in a bike frame with 120mm OLD (Over Locknut Dimension) rear spacing as a 1-speed wheel. [. . . ] Make sure the threads are clean and free of debris. Apply a light coat of Wrench Force® synthetic grease or a similar lubricant over the threads. See your dealer for a recommended grease. Start threads by hand, and install the cog. Follow steps 1-4 to install the lockring.
Figure 2- Track-cog side of hub
To install a single-speed freewheel
Only install a freewheel on the side of the hub without lockring threads. If necessary, remove the thread cover and install it on the other side of the hub. Make sure the threads are clean and free of debris. Apply a light coat of Wrench Force® synthetic grease or a similar lubricant over the threads. See your dealer for a recommended grease. Start threads by hand, and install the freewheel. Tighten the freewheel.
WARNING
An improperly installed or tightened track cog can cause you to lose control and fall. Make sure the cog and lockring are positioned and tightened properly before riding the bike. Maintenance
Once a month, apply a drop of oil between the axle nut and its captive washer (Figure 3). Once a month, apply a light coat of Wrench Force® synthetic grease or a similar lubricant over the axle threads. See your dealer for a recommended grease. Once a month, adjust the hub bearings.
Special user information
Carbon fiber rims require special care and maintenance.
Oil here
Tubular tire installation
When preparing these rims for tubular tire installation, do not sand the rims. [. . . ] Trek Bicycle Corporation shall not be responsible for incidental or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. Labor charges for parts changeovers are not covered by the warranty. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BONTRAGER TRACK WHEELS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BONTRAGER TRACK WHEELS will begin.
