Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BONTRAGER TUBULAR. We hope that this BONTRAGER TUBULAR user guide will be useful to you.
Lastmanuals help download the user guide BONTRAGER TUBULAR.
Manual abstract: user guide BONTRAGER TUBULARTIRE INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] BONTRAGER TUBULAR (SEW-UP) TIRE INSTALLATION AND CARE
Before mounting a tire, make sure that the tire is the correct size for the wheel on which it is to be mounted. Use only rim cement that is specifically marked for gluing tubular tires. [. . . ] Holding the tubular at the valve, insert the valve into the valve hole of the rim (Figure 3).
3
5. Inflate the tubular to between 110130 psi (8-9 bar). Prior to use, let the glued tire and rim sit for a minimum of 24 hours. The rim cement requires this time to cure for proper adhesion.
Inspection and care of tubular tires
Before each use, inflate the tubular tire to the pressure recommended on the tire label. Also inspect the tire for any cuts or abrasions to the tubular casing, and for any cuts or fraying in the base tape.
2. With both hands, and working in opposite directions from the valve, apply tension to the tubular as you stretch the tubular into place on the rim. Keep the valve stem straight in the valve hole. As you near the side of the rim opposite the valve, lift the tire up and into the rim well (Figure 4). If the tire slides across the rim cement, it will spread rim cement onto the sides of the tire.
4
WARNING!
Do not ride a tubular tire that has damaged base tape. A tubular tire with damaged base tape may separate from the base tape, causing the tire to come off the rim. [. . . ] Apply a thin layer of rim cement to the rim well and the base tape of the tubular (Figure 2). Using the base tape as a guide, center the tire on the rim (Figure 5). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BONTRAGER TUBULAR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BONTRAGER TUBULAR will begin.
