User manual BOSCH 9000002507A

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BOSCH 9000002507A. We hope that this BOSCH 9000002507A user guide will be useful to you.

Lastmanuals help download the user guide BOSCH 9000002507A.

Download

Manual abstract: user guide BOSCH 9000002507A

Detailed instructions for use are in the User's Guide.

 [. . . ] Please retain these instructions for future reference. Disconnect power at the breaker before installing. 

OWNER: WARNING:

Contents
Step 1: Step 2: Step 3: Step 4: Step 5: Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cabinet Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing the Microwave Oven . . . 5 - 7 Installing the Microwave Trim . . . . . . . . . . . 7

2

Step 1: Unpacking
A. Microwave Oven Model HMB
Open the box and carefully remove all fillers and packing material.  [. . . ] Install bottom duct with four 1/2" screws to bottom of microwave. 

1/2" Screws (2)

FRONT VIEW OF MICROWAVE

5

Step 4: Installing The Microwave Oven (continued)
Step B
1. Remove the one existing screw from the left side of the microwave oven. Connect the side duct to upper duct as shown. a) Insert projecting tabs of upper duct into holes of side duct. NOTE: Remove any oil or dirt on surface of microwave oven before ducts are attached. a) Upper Duct b)

3 tabs 3 holes Side Duct

3. Peel off the backing of double-sided tape. Attach the side duct and upper duct assembly on the microwave cabinet. Fasten duct assembly to left side of cabinet with one existing screw. 

Existing Screw

Step C
1. On the cutout floor,  mark hole centers for the anti-tip brackets as shown using the supplied template. Be sure to align the center line of template to center line of cutout floor. Install anti-tip bracket onto cutout floor using two 1/2" screws. 

Centerline Cutout Floor

DIMENSIONS:
A = 4-1/4" B = 3" C = 18-3/16"

1/2" Screws (2)

Anti-tip Bracket

6

Step 4: Installing the Microwave Oven (continued)
Step D
1. Slide microwave oven part way into cabinet opening. (Bottom bracket must be flat to the cutout floor to engage correctly with anti-tip brackets as shown). Center the microwave oven within the cutout opening and slide the microwave oven in the anti-tip bracket. (Ensure the microwave oven is accurately centered. Drill pilot holes (use 7/64" drill or #35 drill) through the positioning flange and then install three 1/2" screws at the front of the bottom duct as shown. Bottom Duct Anti-tip Assembly

Anti-tip Bracket

1/2"

screw

Bottom Bracket

Cutout opening
1/2"

screws

Positioning flange

Step 5: Installing the Trim Kit
1. Place the trim kit frame over the microwave oven. Important Note: Trim kit frame orientation is important.  [. . . ] Bosch is not responsible for products which are transported from the United States for use in Canada. Check with your local Canadian distributor or dealer. Bosch,  5551 McFadden Avenue,  Huntington Beach,  CA 92649. For the most up-to-date critical installation dimensions by fax,  use your fax handset and phone 702/833-3600.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH 9000002507A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH 9000002507A will begin.