User manual BOSCH AHS 680-34

[. . . ] Do not use the hedgecutter in the rain or leave it outdoors when it is raining. Switch off and remove plug from mains before adjusting, cleaning or if the cable is entangled or if the cable is cut or damaged and before leaving the hedgecutter unattended for any period. general Power Tool Safety Warnings Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] Any power tool that cannot be controlled with the switch is dangerous and must be repaired. ς Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. ς Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other F 016 L81 185 | (10. Book Page 11 Wednesday, September 10, 2014 7:12 AM English | 11  Never cut a hedge while people, especially children or pets, are nearby. ς The operator or user is responsible for accidents or hazards occurring to other people or their property. ς Do not operate the hedgecutter when barefoot or wearing open sandals, always wear substantial footwear and long trousers. The use of sturdy gloves, non-skid footwear and safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. ς Thoroughly inspect the area where the hedgecutter is to be used and remove all wires and other foreign objects.  Prior to operation , check cutter blades , blade bolts and cutter assembly for wear or damage. Do not operate with a damaged or excessively worn cutting device. ς Check cable for damage before starting work and replace if necessary. Keep cable away from heat, oil and sharp edges. ς Know how to stop the hedgecutter quickly in an emergency. ς Cut a hedge only in daylight or in good artificial light. ς Never operate the hedgecutter with defective guards or without the guard in place. ς Always ensure all handles and guards supplied are fitted when using the hedgecutter. Never attempt to use an incomplete hedgecutter or one with an unauthorised modification. ς Never hold the hedgecutter by the guard. [. . . ] Book Page 14 Wednesday, September 10, 2014 7:12 AM 14 | English Mounting and Operation Action Delivery Scope Connecting the Extension Lead Starting Stopping Working Advice Sawing Function Blade Maintenance Storage and Transport Selecting Accessories Figure 1 2 3 3 4 5 6 6 7 Page 190 190 191 191 192 193 193 193 193 Working Advice Sawing Function Although the tooth opening allows wood to be cut up to Ø 26/34 mm, the tip of the blade is designed to cut wood up to Ø 32/38 mm. Troubleshooting Problem Hedgecutter does not operate Possible Cause Power turned off Mains socket faulty Inbuilt supply cable damaged Separate extension cable damaged Fuse faulty/blown Inbuilt supply cable damaged Hedgecutter operates intermittently Separate extension cable damaged Internal wiring of machine damaged On/Off switch defective Motor runs but blades remain station- Internal fault ary Cutting blade hot Cutting blade blunt Cutting blade has dents Too much friction, due to lack of lubricant Excessive vibrations/noise Machine defective Corrective Action Turn power on Use another socket Inspect supply cable carefully, contact Service Agent for replacement Inspect extension cable, replace if damaged Replace fuse Inspect supply cable carefully, contact Service Agent for replacement Inspect extension cable, replace if damaged Contact Service Agent Contact Service Agent Contact Service Agent Have blade sharpened Have blade inspected/overhauled Apply lubricant spray (1 609 200 399) Contact Service Agent After-sales Service and Application Service www. Com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the chain saw. Uk you can order spare parts or arrange the collection of a product in need of servicing or repair. [. . . ]