User manual BOSCH AKE 35-19 S

[. . . ] The term "power tool" in the warnings refers to your mains operated (corded) power tool. It is recommended that the first time user should have practical instruction in the use of the chainsaw and the protective equipment from an experienced operator and that the initial practice should be cutting logs on a saw horse or cradle. Remove the plug from the socket or mains immediately before carrying out any adjustments, servicing or maintenance or if the cable is damaged or cut. Obtain and wear eye and ear protection at all times while operating the power tool. [. . . ] The couplings of connection leads must be protected against splashes and the coupling sockets on the leads must be made of rubber or coated with rubber. Fixing means for the connection leads must be used. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. if the supply cord is damaged , it must be replaced by a Bosch Service Centre. Products sold in GB only: Your chain saw is fitted with an approved 13 A (BS 1363/A) electric plug and is protected by a 13 A fuse (ASTA Approved to BS 1362). If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorized customer service agent. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere. Do not connect the chain saw to mains before it is completely assembled. S Always use gloves when handling the chain. Place the chain saw on any suitable flat surface. Ensure chain is in correct running direction by comparing with chain symbol 20. ­ Avoid dirt or debris entering oil tank, refit oil filler cap 4 and tighten. The voltage of the power source must agree with the value given on the nameplate of the machine. Machines designated for 230 V can also be operated with 220 V. Starting Hold chain saw as described in "Cutting". Press the lock-off button 3, then fully press the On/ Off switch 2 and hold in this position. Do not stop chain saw after sawing by activating the front hand guard (kickback brake). ­ Never work with a loose, widely stretched or the heavily worn out chain. ­ Always the hold chain saw firmly with both hands. General Behavior D Always hold the chain saw firmly with both hands. Front grip with the left hand and rear grip with the right hand. Fully grip both handles at all times during operation. [. . . ] Have your chain sharpened professionally at your Bosch approved service agent or sharpen the chain yourself using the Bosch sharpening kit or a Dremel power tool with the appropriate grinder (1453), both available at your Bosch approved service agent. Follow the sharpening instructions supplied with the sharpening kit. Proper functioning of the automatic oiler can be checked by running the chain saw and pointing the tip of the chain bar towards a piece of cardboard or paper on the ground. Caution: Do not touch the ground with the chain. [. . . ]