User manual BOSCH AMW 10 HS

[. . . ] If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. When in use perform a daily, visual inspection in order to identify any significant damage or defects this inspection must also be competed if the tool is dropped or subjected to any significant impacts. It is recommended for increased electrical safety to use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it. [. . . ] The operator is responsible for third persons in the working area. Never grasp the blade of the hedgecutter. Children or persons unfamiliar with these instructions must not operate the hedgecutter. Local regulations may restrict the age of the operator. Never cut a hedge while people, especially children or pets, are nearby. The operator or user is responsible for accidents or hazards occurring to other people or their property. Do not operate the hedgecutter when barefoot or wearing open sandals, always wear substantial footwear and long trousers. The use of sturdy gloves, non-skid footwear and safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. Thoroughly inspect the area where the hedgecutter is to be used and remove all wires and other foreign objects. bosch Power Tools Prior to operation , check cutter blades , blade bolts and cutter assembly for wear or damage. Do not operate with a damaged or excessively worn cutting device. Know how to stop the hedgecutter quickly in an emergency. Before operation check the safe double locking function of the blade swivel mechanism. The blade can suddenly fold down, if unlocked and comes into contact with a branch. Cut a hedge only in daylight or in good artificial light. Never operate the hedgecutter with defective guards or without the guard in place. Always ensure all handles and guards supplied are fitted when using the hedgecutter. Never attempt to use an incomplete hedgecutter or one with an unauthorised modification. Never hold the hedgecutter by the guard. While operating the hedgecutter always be sure of a safe and secure operating position at all times, especially when using steps or a ladder. Always be aware of your surroundings and stay alert for possible hazards that you may not hear whilst operating the hedgecutter. [. . . ] 25 see type plate on the garden product Declaration of Conformity We declare under our sole responsibility that the product described under “Technical data” is in conformity with the following standards or standardization documents: EN 60335 according to the provisions of the directives 2006/95/EC, 2004/108/EC, 2006/42/EC, 2000/14/EC. 2000/14/EC: Guaranteed sound power level 103 dB(A). Troubleshooting Problem Motor runs but blades remain stationary Cutting blade hot Possible Cause Multitool-attachment not properly connected to power unit Cutting blade blunt Cutting blade has dents Too much friction, due to lack of lubricant Corrective Action Check for correct assembly Have blade sharpened Have blade inspected/overhauled Apply lubricant spray (1 609 200 399) F 016 L70 916 | (26. Com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product. [. . . ]