User manual BOSCH BGL452100 MAXX'X

[. . . ] When passing the vacuum cleaner on to a third party, please also pass on this instruction manual. Intended use This vacuum cleaner is intended for domestic use and not for commercial use. Only use this vacuum cleaner in accordance with the instructions in this instruction manual. The manufacturer will not accept any responsibility for damage caused by improper use or incorrect operation. [. . . ] Ⅲ High suction range: For vacuuming stubborn dirt and very heavily soiled surfaces. Figure 10 Adjusting the floor tool: a) For vacuuming rugs and carpets b For vacuuming hard floors Before using for the first time Figure 1* Push the handle onto the flexible hose until it engages. Setting up Figure 2 a) Push the flexible hose adapter into the opening on the vacuum cleaner until it engages. B To remove the flexible hose, press the release button and pull the hose out. Figure 3* a) Connect the handle and the telescopic tube together. B) Push the handle into the telescopic tube until it engages. To release the connection, squeeze the locking collar and pull the telescopic tube out. Figure 4* a) Connect the floor tool and the telescopic tube together. B) Push the telescopic tube straight into the connecting piece of the floor tool until it engages. To release the connection, squeeze the locking collar and pull the telescopic tube out. Figure 5* To adjust the length of the telescopic tube, adjust the adjusting sleeve/sliding switch in the direction of the arrow and adjust the tube to the required length. Figure 6* Attach the accessories holder to the multi-purpose nozzle and clip it onto the suction pipe/telescopic tube. Floor tools are subject to a certain amount of wear, depending on the type of hard floors you have (e. Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools. Turbo brush If your vacuum cleaner is equipped with a turbo brush, please consult the accompanying instruction manual for notes on its use and maintenance. Figure 11* Vacuuming with accessories Attach the nozzles to the tube or handle as required: a) Crevice nozzle for vacuuming crevices and corners, etc. b) Upholstery nozzle for vacuuming upholstered furniture , curtains , etc. 38 en Figure 12* Pet hair tool Ⅲ Floor tool for easy and thorough vacuuming of pet hair. … Push the telescopic tube into the connecting piece of the pet hair tool until it engages. Press on the locking collar and pull out the telescopic tube to disconnect. [. . . ] Changing the dust bag and filters Replacing the dust bag Figure 17 If the dust bag change indicator lights up brightly and evenly when the floor tool is lifted from the carpet and the highest suction power is selected, the dust bag must be changed, even though it may not yet be full. In this case it is essential to change the dust bag due to the type of material it contains. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the dust bag change indicator being triggered. Figure 18 Open the lid by moving the locking lever in the direction of the arrow. [. . . ]