User manual BOSCH BGS52200

[. . . ] 6 *je nach Ausstattung de 6 5 7 8 9 10 4 11 12 13 14 15 3 2 21 18 19 20 1 16 17 22 23 24 25 7 en Congratulations on your purchase of the Bosch Relaxx´x vacuum cleaner. This instruction manual describes various Relaxx´x models, which means that some of the equipment features and functions described may not apply to your model. You should only use original Bosch accessories, which have been specially developed for your vacuum cleaner, to achieve the best possible vacuuming results. Please keep this instruction manual for future reference. [. . . ] A) Stand the appliance up by the handle. B)Slide the hook on the floor tool into the storage aid. Emptying the dust container Figure 17 In order to achieve good vacuuming results, the dust container should be emptied after every use or, at the latest, when dust or dirt has visibly collected on the fluff filter or when dust at one point in the container has reached the height of the marking. When emptying the dust container, always check how dirty the fluff filter is and, if necessary, clean it as detailed in the "Cleaning the fluff filter" instructions. Figure 26 Vacuum cleaner with “RotationClean” function Figure 21* The indicator lights up blue when the appliance is working at its optimum level. Once the indicator turns red and flashes, the plate filter must be cleaned. The appliance is automatically adjusted back to the lowest power setting. Figure 22* ● Switch the appliance off in order to clean the plate filter. Caution: the filter can only be cleaned if the appliance is switched off. — Open the appliance lid by pulling the locking tab. — To clean the plate filter, turn the knob at least three turns through 180°. Figure 18 a)Open the appliance lid by pulling the locking tab. B)Use the handle to remove the dust container from the appliance. Figure 19 a)Release the filter unit of the dust container by pressing the release button. B)Take the filter unit out of the dust container and empty the dust container. Figure 20 a)Insert the filter unit into the dust container, making sure it is correctly seated. The arrow on the filter cover must point in the direction of the locking tab. B)Press on the container lid until you hear it click into place. C) When reinserting the dust container into the appliance, make sure it is correctly seated. Close the appliance lid until the locking tab clicks into place again. You can also clean the filter if the suction is becoming less powerful, even if the indicator has not lit up. We recommend that you clean the plate filter each time before emptying the dust container. [. . . ] E)Close the side flap until you hear the locking tab click into place again. F) Insert the dust container into the appliance and close the appliance lid. Cleaning the micro filter Figure 29* ● Open the appliance lid and remove the dust container. Figure 18 a)Use the locking tab to open the side flap. [. . . ]