User manual BOSCH CBG934AB1

[. . . ] 5 4 Familiarising yourself with your appliance . Observe the following safety instructions. Keep the instruction manual and the Product information safe for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. [. . . ] Configure a setting in the Home Connect app and send it to the appliance. Notes ¡ If you open the appliance door within 15 minutes Of activating remote start or of the operation ending, the manual remote start is deactivated. When you start the oven using the controls on the appliance itself, the remote start function is activated automatically. You can use the Home Connect app to adjust the settings or start a new programme. Your appliance's software can be updated using the software update function, e. For the purposes of optimisation, troubleshooting or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Has been successfully downloaded, you can start installing it via the Home Connect app if you are in your WLAN home network (Wi-Fi). The Home Connect app will inform you once installation is successful. Notes ¡ You can continue to use your appliance as normal While updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. We recommend that you install security updates as soon as possible. You cannot use your appliance during installation. Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appli- Ance codes as well as the MAC address of the Wi-Fi communication module installed). Status of any previous reset to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app. To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. [. . . ] If the display on the appliance remains dark, it has not been connected correctly. Disconnect the appliance from the mains and check the connection. Electrically connect the appliance with the protective contact plug Note: The appliance must only be connected to a protective contact socket that has been correctly installed. Insert the plug into the protective contact socket. [. . . ]