User manual BOSCH GSB 13-RE

[. . . ] Typically the A-weighted noise levels of the product are: sound pressure level: 97 dB (A); sound power level: 110 dB (A). When drilling use the auxiliary handle 6. Depending on the application, the auxiliary handle can be adjustable in different positions. DEPTH STOP ROD For serial drills of same depth you have to put the depth stop 7 in the auxiliary handle and to adjust the according to your necessity. [. . . ] When drilling in metal, use special cutting oil to prevent the bit to burn. Before any work on the machine itself, pull the mains plug. For safe and proper working, always keep the machine and the ventilation slots clean. If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorized after-sales service centre for Bosch power tools. Important: If for any reason the moulded plug is removed from the cable of this machine it must be disposed of safely. Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee. In case of complaint please send the machine, undismantled, to your dealer or the Bosch Service Centre for electric power tools. Hard metal drills are necessary when working with concrete, stone and brick. Small workpieces Use a vise or clamps to hold your workpiece. Loose pieces could grip int the bit and cause accidents. Read all instructions Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS d) Remove any adjusting key or wrench before switching on the power tool. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Work area a) Keep work area clean and well lit. cluttered and poorly lit areas can result in accidents. B) Do not operate power tools in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. [. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while if you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ]