User manual BOSCH HBG378AS0

[. . . ] 5 4 Familiarising yourself with your appliance . Observe the following safety instructions. Keep the instruction manual and the Product information safe for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. [. . . ] Use the function selector to set the programmes . Use the temperature selector to set the temperature. Press the button repeatedly until is highlighted Use the or button to set the time. A After a few seconds, the appliance starts heating and the cooking time counts down. Once the time has elapsed, the display shows the time as zero. The appliance stops heating up and responds again as usual outside of Sabbath mode. The appliance automatically switches off after approx. You can configure the basic settings for your appliance to meet your needs. Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of your appliance. Signal duration upon completion of a time or timer period 1 Factory setting (may vary according to model) 2 Depending on the appliance specifications = 3 seconds1 = 6 seconds = 10 seconds 1 Factory setting (may vary according to model) 2 Depending on the appliance specifications Press and hold the button for approximately four seconds. A The first basic setting appears in the display, e. Use the temperature selector to change the setting. Use the or button to switch to the next basic Selection = dark = medium1 = bright = hide the time = display the time1 = no = yes1 = yes, with locked door = no = yes1 = short = medium1 = long = extra-long = no 1 (for rails and 1-level pull-out) = yes (for 2- and 3-level pull-out) = no1 = yes = no = yes1 = no1 = yes 4. To save the changes, press and hold the button for approx. Note: Your changes to the basic settings will be retained even after a power failure. 3Discarding changes to the basic settings turn the function selector. A All changes are discarded and not saved. To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. In order to avoid damaging the various oven surfaces on the appliance, do not use unsuitable cleaning products. Unsuitable cleaning products may damage the surfaces of the appliance. Do not use cleaning products with a high alcohol content. [. . . ] This is available from after-sales service. Contact protection must be guaranteed by the installation. Electrically connect the appliance with the protective contact plug Note: The appliance must only be connected to a protective contact socket that has been correctly installed. Insert the plug into the protective contact socket. [. . . ]