User manual BOSCH HGG223120E

[. . . ] Instruction manual HGG223120E Making cooking as much fun as eating Please read this instruction manual. This will ensure that you make use of all the technical benefits the cooker has to offer. You will be given important safety information. You will then be introduced to the individual components of your new cooker and we will show you how to adjust it step by step. [. . . ] Turn on the main gas switch of the appliance. Things that must be done for the lower gas burner To clear the odour caused by first use, heat up the oven with the lid closed. Pushing the function selector switch, turn it to the left to 270 ºC. Keep on pushing the function selector switch of the oven and push the ignition button at the same time. 3. The gas coming out of the lower gas burner of the oven is ignited by the ignition button. Keep on pushing the function selector button on the oven for about 10 seconds to activate the safety system. Check the burning of the gas by looking through the inspection hole in the bottom iron panel of the oven. If there are no flames, repeat the above steps starting with step 1. Turn off the function selector switch after 30 minutes. 23 Things that must be done for the gas grill Heat up the grill in order to clear the odour caused by first use. Attach the protective sheet under the control panel. Place the sheet with its longest end facing the front and the curve in the tip looking down. The protecting plate is secured using the clips in the recess below the control panel. Ensure that the protecting plate is properly engaged in the clips. If the protecting plate is properly engaged, you will not be able to pull it any further towards you. If the protecting plate is not properly engaged, try to insert it into the recess at a slightly sharper angle and engage it in the clips. Close the oven lid until it is as close as possible to the protective sheet. Pushing the function selector button, turn it to the right and select the grill function x. Keep on pushing the function selector switch of the oven and push the ignition button at the same time. 5. The gas released from the gas grill of the oven is ignited by the ignition button. Keep on pushing the function selector button of the oven for about 10 seconds to activate the safety system. Control whether the gas is ignited or not. If there are no flames, repeat the above steps starting with step 3. Turn the function selector switch off after 30 minutes. [. . . ] The replacement glass cover may be obtained from the after sales service. Please specify the E number and FD number of your appliance. 39 After sales service Our after sales service is there for you if your appliance should need to be repaired. You will find the address and telephone number of the nearest after sales service point in the telephone directory. The listed after sales service centres will also be pleased to give you the details of an after sales service point near you. E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after sales service. [. . . ]