User manual BOSCH HMG976KB1

[. . . ] 7 4 Familiarising yourself with your appliance . Observe the following safety instructions. Keep the instruction manual and the Product information safe for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. [. . . ] When the appliance is switched off, does not light up. 2Deactivating the childproof lock You can deactivate the childproof lock at any time. To deactivate the childproof lock, turn the setting Ring round once at the top, starting in a clockwise direction, so that the graphic on the ring completely fills up. Only when the door is opened ¡ Always off ?Button lock only1 ¡ Door lock + keylock ¡ Deactivated Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www. The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Please also follow the instructions in the Home Con- nect app. Notes ¡ Please note the safety precautions in this instruction Manual and make sure that they are also observed when operating the appliance via the Home Connect app. "Safety", Page 2 ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. Back and select a different basic setting. To exit the basic settings, use to go back to the Main menu or switch off the appliance using . Note: Your changes to the basic settings will be retained even after a power failure. To set the time, press the hour display or the minute Use the setting ring to set the time. The minutes are counted in 5-minute increments. To set it to the precise minute, press and hold the corresponding area in the setting ring for around 1-2 seconds. Use the setting ring to set the minutes. To exit the basic settings, use to go back to the main menu or switch off the appliance using . [. . . ] Contact protection must be guaranteed by the installation. If the display on the appliance remains dark, it has not been connected correctly. Disconnect the appliance from the mains and check the connection. Electrically connect the appliance with the protective contact plug Note: The appliance must only be connected to a protective contact socket that has been correctly installed. [. . . ]