User manual BOSCH INDEGO

[. . . ] Wait until all machine components have completely stopped before touching them. The blades continue to rotate after the machine is switched off, a rotating blade can cause injury. Pay attention that bystanders are not injured through foreign objects thrown from the machine. Warning: Keep a safe distance from the machine when operating. [. . . ] 2012 Explanation of Installation Guide (see pages 3–11) Action Delivery scope/unpacking product Position the docking station Thread wire through base plate Figure 1 2–3 4 Select a position for the docking station, horizontally leveled and out of direct sun light. Make sure that the docking station is placed by the side of the cutting area with a straight 2 m track in front and behind. Whilst stood in the grass area to be cut it is important that the docking station charging pins point to the left. (see figure 2) Note - If the docking station is positioned with the charging pins pointing either into the grass area or pointing to the right the Indego will not leave the dock. Pull the wire end through the front hole of the base plate and straight through the wire duct and the rear hole. The buttons next to the arrow symbols or allow to go right or left through the menu options. The display will change to the next screen as soon as any option is selected and confirmed. Installation First press the button next to “Language choice”. The “Set Language” screen appears and shows the following. Set Language English Deutsch Dansk Svenska Norsk Suomi Save Select one of the “Language” options and confirm with “Save”. PIN Code Please set up PIN Code Initial Programming Plug the isolator key into the machine and put it into the docking station for charging. (see figures 12 – 14) The welcome screen appears and shows following symbols: Proceed Select “Proceed” to enter your personal PIN Code. PIN Code Robotic Lawnmower Enter new PIN: __ _ _ Back Symbol    Meaning Multifunctional buttons, left Battery capacity Title of Menu/Submenu Enter Select the input position with the left/right cursors, adjust the digits with the up/down cursors and confirm with “Enter” or select “Back” to return to the first “PIN Code” screen. Book Page 28 Friday, November 23, 2012 9:10 AM 28 | English Note: Keep the PIN code secret from third parties. If you have lost your personal PIN code, you will have to return the Indego and its docking station to a Bosch Service Center to be unlocked. please contact your dealer or Bosch (see “After-sales Service and Application Service”). Date & Time Mapping Completed Is this the back of the docking station or an obstacle? if this is an obstacle , remove it and machine will continue mapping. Hh:mm dd/mm Format: 12 hr Back Save Obstacle Docking Station Select the “hh:mm”, “dd/mm” and “Format: 12 hr” input positions with the left/right cursors, adjust the values with the up/down cursors and confirm with “Save” or select “Back” to return to the first “PIN code” screen. Installation Please press Follow Wire to complete installation process Mapping is complete when the machine reaches the back of the docking station. If the machine hasn’t reached the back of the docking station press “Obstacle” and observe information indicated on the screen to complete installation. If the machine has reached the back of the docking station press “Docking Station”. [. . . ] TIDSPLAN 1 – Mandag Invented for life Tidsvindue 1: Start 12 : 00 Tidsvindue 2: Start : Afbryd On Slut 14 : 00 Off Slut : Gem Græsslåning Menu Efter installationen kan du enten trykke på „Græsslåning“ for at starte græsslåningen med det samme eller indrette en tidsplan under „Menu > Tidsplan udvalg“. Eksempel: Tidsplan udvalg Info MANUEL TIDSPLAN 1 TIDSPLAN 2 TIDSPLAN 3 TIDSPLAN 4 TIDSPLAN 5 Vælg Indstil tidsvinduet for „Start“ og „Slut“ for den automatiske plæneklipning. Book Page 99 Friday, November 23, 2012 9:10 AM Dansk | 99 Indstillinger Sikkerhedsoptio- Ændr PIN ner Forklaring Det er nødvendigt at indtaste PIN-koden for at genaktivere efter auto-lås og sikkerhedsfrakobling. Book Page 100 Friday, November 23, 2012 9:10 AM 100 | Dansk Fejlsøgning Symptom Haveværktøj kører ikke Mulig årsag Tilstopning mulig Akkuen er ikke helt opladet Græs for langt Akkuen er for kold/varm Strømkredsafbryderen er ikke blevet sat rigtigt i/fuldstændigt i Afhjælpning Kontrollér haveværktøjet og frigør det evt. [. . . ]