User manual BOSCH INDEGO S+ 500

[. . . ] Thank you, for purchasing the Indego Robotic Mower. Please read the safety instructions provided below before installing the Indego. Read all safety warnings and all instructions. Make yourself familiar with the controls and the proper use of the machine. [. . . ] During the learning phase, the visual result may not be optimal. Approximate runtimes for complete lawn area coverage using LogiCut are listed below. Please note that the runtimes will vary depending on the lawn complexity and number of objects within the lawn area. This achieves good mowing results, the battery charge will last longer and you avoid debris on the lawn. In "manual" mode, the mower works until the lawn is mowed. Mowing is interrupted only for charging the battery. When the lawn area is mowed, the mower returns to the docking station. In the programmable "Schedule" mode, with the "Bosch AUTO" calendar function or with the Bosch "SmartMowing" functionality, the mower operates continuously for a set period of time. Mowing is interrupted only for charging the battery. If the lawn area is mowed before the time period expires, the mower returns to the dock. To stop mowing prematurely, press the Stop button or send the mower back to the docking station pressing the confirm button . With Indego S+ 500 and M+ 700 you can send the mower back to the docking station, by pressing the "Dock" button on the free Bosch Smart Gardening App. energy saving mode The mower reduces its energy consumption by automatically switching off the power in the perimeter wire when it is not mowing and not being charged. To wake up the mower manually from the energy saving mode, press the confirm button and afterwards select either "Mow now" or another "Mowing mode", while the mower is in the docking station. With Indego S+ 500 and M+ 700 you can wake up the mower remotely from the energy saving mode, by pressing the "mow" button on the free Bosch Smart Gardening App. For mowing based on an active schedule or with the "Bosch AUTO" calendar function or with the Bosch "SmartMowing" functionality, the energy saving mode is automatically ended. Mowing small lawn areas with , , SpotMow" SpotMow is intended for mowing small areas that require special treatment without having to mow the whole lawn, such as the area under a piece of garden furniture that has been removed. The mower is positioned at the lower left corner of the intended area to mow (see figure H). The final mowed area depends on the lawn conditions; it will not necessarily be an exact square. After completion of , , SpotMow", follow the instructions on the screen. Note: For safety reasons, , , SpotMow" cannot be used outside the perimeter wire. sensors The mower is equipped with the following sensors: ­ The lift-up sensor is activated when the mower is lifted. [. . . ] The batteries are suitable for road-transport by the user without further restrictions. : by air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Dispatch battery packs only when the housing is undamaged. [. . . ]