User manual BOSCH KSV36VI3P

[. . . ] 30 Switching off and disconnecting the appliance . Safety and warning information Before you switch ON the appliance please read the operating and installation instructions carefully!They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you fail to comply with the instructions and warnings. [. . . ] Otherwise, the refrigerating unit must work harder. Therefore: Never cover or block the ventilation openings!After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance (see chapter "Cleaning the appliance"). electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220­240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in nonEuropean countries, check whether the stated voltage and current type match the values of your mains supply. This information can be found on the rating plate. Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine-controlled inverters. Mainscontrolled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications (e. On ships or in mountain lodges) which are not connected directly to the national grid. Getting to know your appliance please fold out the illustrated last page. These operating instructions refer to several models. 1­4 Controls 5 Light (LED) 6 Glass shelf 7 Condensation outlet 8 Vegetable container 9 Height-adjustable feet 10* Butter and cheese compartment 11 Door shelf 12 Egg rack 13* Door shelf "EasyLift" 14 Shelf for large bottles 2 Temperature display The numbers correspond to the set refrigerator compartment temperatures in °C. 3 "super" display Illuminates , if the super cooling is in operation. 4 Temperature selection button Press this button to set the temperature. Switch on the appliance with the On/Off button 1. [. . . ] If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day. Power failure; the fuse has Connect mains plug. Check whether the power been switched off; the mains is on, check the fuses. [. . . ]