User manual BOSCH KSW 26V80/02

[. . . ] Fresh compartment, just above 0°C · Drawer for dry or wrapped food. · Drawer with an adjustable humidity level for fresh salades, vegetables and fruits. Fridge at the top, drawer-type freezer at the bottom · The highly ergonomic vegetable compartment is placed at waist height as it is frequently used. · The drawer-type freezer minimizes temperature variations and stores food cleanly and conveniently. [. . . ] Turn the right adjusting leg in the direction of the arrow until the appliance is level. 4 PREPARING THE FRIDGE/FREEZER To prepare your appliance for use and check that it is running correctly, take the following steps. 1 2 3 4 Install all shelves and compartments removed during transport in the correct positions. Clean the fridge/freezer and accessories to remove any dust that accumulated during packing and shipping. The interior light should accumulated during come on when you open the refrigerator. Set the temperature control to the coldest temperature and let the refrigerator operate for one hour. The freezer should get slightly chilled and the motor should run smoothly with a soft hum and no noise. Your fridge/freezer is operated by a compressor which switches "on and off" to maintain the internal temperature. When the compressor is new, it requires running in for a period of up to five months. During this period, it may be slightly noisy. This is quite normal and does not represent a fault. Store food once the temperature in the refrigerator is sufficiently low. It takes a few hours after starting the refrigerator to reach the proper temperature. · The temperature changes in sequence. After -25°C, the display returns to -17°C again. · Freezer temperature range: -17°C to -25°C. Once the power is re-instated, the temperature display displays "­ ­". In this case, the display "­ ­" is disappeared by pressing FRE. TEMP button . 3 Note 6 4 REF. TEMP Button · To change the refrigerator temperature: ­ Press the REF. TEMP button. The current setting temperature is displayed () preceded by "R" (). ­ Press the REF. TEMP button one or more times or hold it down until the required temperature is displayed (). ­ When you complete the setting of refrigerator temperature, the refrigerator temperature display () flashes 5 times and returns to the setting temperature of the freezer. · The temperature changes in sequence. After +6°C, the display returns to +1°C. [. . . ] · Have any foreign objects fallen behind or under the appliance?· Is the noise coming from the compressor in the appliance?· A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the various accessories contract or expand. [. . . ]