User manual BOSCH MULTITALENT MCM3200W

[. . . ] 12 12 Robert Bosch Hausgeräte GmbH en Congratulations on the purchase of your new BOSCH appliance. You can find further information about our products on our web page. 13 15 15 18 19 19 19 21 21 Before use, read these instructions carefully in order to become familiar with important safety and operating instructions for this appliance. If the instructions for correct use of the appliance are not observed, the manufacturer’s liability for any resulting damage will be excluded. [. . . ] Shred soft cheese with the coarse side only at setting 2. Shredding reversible disc – coarse/fine for shredding vegetables, fruit and cheese, except for hard cheese (e. Designation on the reversible shredding disc: “2” for the coarse shredding side „4“ for the fine shredding side Warning!Do not add ingredients until the tools have been inserted. Lid lug must be located fully in the slot in the bowl handle. ρ Set the rotary switch to the desired setting. ρ  Attach the bowl (arrow on bowl on dot on the appliance) and rotate as far as possible in a clockwise direction. Place disc on the disc holder so that the drivers on the tool holder grip the opening in the discs. robert Bosch Hausgeräte GmbH 16 16 en      Warning!Empty the bowl before it becomes so full that the cutting or grating contents reach the carrier disc. attach lid with pusher (match arrow on lid to arrow on bowl) and rotate in a clockwise direction. Lid lug must be located fully in the slot in the bowl handle. Set the rotary switch to the desired setting. Fill with contents which are to be sliced or shredded. When adding contents which are to be sliced or shredded, apply only light pressure to the pusher. Remove the pusher and add ingredients through the feed tube. Do not process deep-frozen ingredients (except ice cubes). Important information If the seal is damaged or not correctly positioned, liquid may run out. ρ If processing hot liquids, steam escapes through the funnel in the lid. After using the appliance  Set the rotary switch to 0/off. ρ Remove tool: – Take tool holder together with universal blade, whisking disc or kneading hook out of the bowl. € Take out the cutting discs by the plastic stud in the centre. [. . . ] Please ask your dealer or inquire at your local authority about current means of disposal. Instructions on disposal Warranty conditions The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. [. . . ]