User manual BOSCH MUM58020

[. . . ] Intended use This appliance is intended for domestic use only. Use the appliance only for processing normal amounts of food and for normal amounts of time for domestic use. Do not exceed permitted maximum quantities (X "Application examples" see page 26). The appliance is suitable for mixing, kneading and beating food. [. . . ] Reducing the cord length: Pull gently on the cord and allow it to roll up to the required length. Then gently pull the cord again and slowly release; the cable is locked. Do not twist the cord when inserting it. If the appliance features an automatic cord winder, do not insert the cord manually. If the cord jams, pull out the cord all the way and then allow it to wind up. WWRisk of injury from the rotating tools While the appliance is operating, never place fingers in the mixing bowl. Attach the cover (12) before operating the appliance!Do not change tools until the drive has come to a standstill ­ when the appliance is switched off, the drive continues running briefly and stops in the tool change position. Do not move the swivel arm until the tool has come to a standstill. Always secure unused drives with protective drive covers. Whisk (14) for whisking egg whites, cream and light dough, e. Kneading hook (15) for kneading heavy dough and mixingin ingredients that ought not be cut (e. Working with the bowl and the tools Fig. Insert the bowl: Tilt the bowl forwards and then set it down. Turn anti-clockwise until it locks into place. Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. Put the ingredients to be processed into Set the rotary switch to the desired setting. our recommendation: ­­ Stirrer: First stir in at setting 1 (1), then select setting 7 (4) ­­ Whisk: setting 7 (4), mix in at setting 1 (1) ­­ Kneading hook: first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients Switch off the appliance with the rotary switch. Add more ingredients through the feed After using the appliance Switch off the appliance with the rotary Take the tool out of the drive. Clean all parts, see "Cleaning and servicing". WWRisk of injury Do not grip the sharp blades or edges of the cutting discs. [. . . ] For cutting fruit and vegetables into equally sized cubes. For cutting fresh meat for steak tartare or meat loaf. Fine disc for pasties and spreads, coarse disc for sau sages and bacon. With metal template for 4 different pastry moulds. [. . . ]