User manual BOSCH MUM58NP60

[. . . ] 16  Intended use en Intended use This appliance is intended for domestic use only. Use the appliance only for processing normal amounts of food and for normal amounts of time for domestic use. Do not exceed permitted maximum quanti­ ties (X “Application examples” see page 26). The appliance is suitable for mixing, kneading and beating food. [. . . ] Attach the cover (12) before operating the appliance!Designation on the reversible shredding disc:  “2” for the coarse shredding side  “4” for the fine shredding side Warning!The reversible shredding disc is not suitable for shredding nuts. Shred soft cheese with the coarse side only at setting 7 (4). Grating disc – medium-fine for grating raw potatoes, hard cheese (e. The grating disc is not suitable for grating soft cheese and cheese slices. Working with the continuous-feed shredder Fig. G: ■■ Press the Release button and move the swivel arm to position 2. –■ Insert the bowl:  Tilt the bowl forwards and then set it down. Turn anti-clockwise until it locks into place. –■ Press the Release button and move the swivel arm to position 3. –■ Remove drive cover from the drive of the continuous-feed shredder (Fig. –■ Hold disc holder at the lower end, ensuring that the two tips are face up. –■ Carefully place the required slicing or shredding disc onto the tips of the disc holder (Fig. € In the case of reversible discs, ensure that the required side is face up. –■ Grip disc holder at the upper end and insert into the housing (Fig. –■ Attach the cover (note mark) and turn all the way in a clockwise direction. –■ Place continuous-feed shredder on the drive and rotate all the way in a clockwise direction, as illustrated in Fig. –■ Put food to be processed in the feed tube and push down with the pusher. Prevent the cut ingredients from building up in the outlet opening. tip: To ensure even cutting results , process thin ingredients in bunches. Note: If the food to be processed sticks in the continuous-feed shredder, switch food processor off, pull out mains plug, wait until the drive comes to a standstill, remove cover from the continuous-feed shredder and empty feed tube. [. . . ] If an accessory is not included in the product package, it can be purchased via the trade or from customer service. For at genindkoble apparatet drej drejekon­ takten hen på P og så tænd for det igen. Betegnelse på vende-skæreskive:  ”1” for den tykke skæreside  ”3” for den tynde skæreside OBS!Betegnelse på vende-raspskive:  ”2” for den grove raspside  ”4” for den fine raspside OBS! [. . . ]