User manual BOSCH MUM59343

[. . . ] Congratulations on the purchase of your new Bosch appliance. In doing so, you have opted for a modern, high-quality domestic appliance. You can find further information about our products on our web page. For your safety Before use, read these instructions carefully in order to become familiar with important safety and operating instructions for this appliance. [. . . ] WWRisk of injury from rotating tools While the appliance is operating, never place fingers in the mixing bowl. Attach the cover (12) before operating the appliance!Do not change tools until the drive has come to a standstill ­ when the appliance is switched off, the drive continues running briefly and stops in the tool change position. Do not move the swivel arm until the tool has come to a standstill. For reasons of safety the appliance may only be operated when unused drives have been covered with drive guards (5, 8). Professional beating whisk (14) for whisking egg whites, cream and light dough, e. Kneading hook (15) for kneading heavy dough and mixingin ingredients that ought not be cut (e. Important information concerning the use of the whisk Figure E: The whisk should almost touch the bottom of the bowl to ensure that the ingredients are optimally mixed. If not, adjust the height of the whisk as follows: Remove mains plug. Insert the whisk into the drive until the whisk locks into position. hold whisk in place and loosen nut clockwise using open-ended wrench (size 8). Set the whisk to the optimum height by rotating the whisk: ­ Turn clockwise: Raise ­ Turn anti-clockwise: Lower Press the Release button and move the swivel arm to position 1. Check the height of the whisk and, if required, correct. When the height has been set correctly, press Release button and move the swivel arm to position 2. hold whisk in place and tighten nut anticlockwise using open-ended wrench (size 8). Working with the bowl and the tools Figure F: Press the Release button and move the swivel arm to position 2. Insert the bowl: Tilt the bowl forwards and then set it down. Turn anti-clockwise until it locks into place. Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. Put the ingredients to be processed into Set the rotary switch to the desired setting. Our recommendation: ­ Professional flexi stirring whisk: First mix at setting 1-2, then setting 3-5 as required ­ Professional beating whisk: setting 7, mix in at setting 1 ­ Kneading hook: first stir in at setting 1, knead at setting 3 Adding more ingredients Switch off the appliance with the rotary switch. [. . . ] Switch the blender to setting 7 and slowly pour the oil through the funnel and mix until the mayonnaise emulsifies. Eat the mayonnaise immediately, do not store. For cutting fruit and vegetables into equally sized cubes For cutting fresh meat for steak tartare or meat loaf. Perforated disc Fine disc for pasties and spreads, coarse disc for sauset fine (3 mm), sages and bacon. [. . . ]