User manual BOSCH NKE625A01C

[. . . ] . 3-16 Instruction manual NKE 625. . , NKF 635. . , NKF 645. . , NKB 625. . , NKN 62. . , NKH 635. . , NKN 775. . 5650035831 B010685 1 ø 18 NKE 625. . ø 17/26, 5 ø 14, 5 ø 14, 5 ø 21 ø 18/12 NKB 625. . ø 17/26, 5 ø 21/14, 5 NKF 635. . , NKF 645. . ø 18 ø 14, 5 ø 14, 5 ø 14, 5 ø 21/12 ø 18 ø 21 NKN62. . , NKN 775. . [. . . ] Switching off: Touch the m symbol again. The indicator light goes out. Extended cooking zone Halogen hotplate With these hotplates, the heating system reaches full power after just a few seconds. The halogen heating ring lights up very brightly. Please do not look at the halogen light since it could blind you. 8 Operating and residual heat indicator Using residual heat The i operating and residual heat indicator lights up when you switch on a hotplate. After you have finished cooking, it indicates residual heat. It goes out when the hotplate has cooled down sufficiently. You can use this residual heat economically, e. g. to keep a small meal warm or to melt chocolate. The hotplate temperature is controlled by switching the heat on and off, this means that it is not always possible to see the red, glowing heat. If you select a low heat setting, the heat will switch off more often than at higher heat settings. The heat also switches on and off at the highest setting. There may be a gentle buzzing as the hotplates heat up. The heat may show differently on the individual hotplates. Depending on the angle of vision, the heat may appear to spread beyond the marked boundary of the hotplate. These are technical features and do not influence quality or function. Depending on the surface area of the plate, a small, uneven gap may form between the plate and the hob. For this reason, the hob has an elastic seal all the way round. Glass ceramic may display surface area irregularities inherent to the material. The glassy surface area of the hob means that tiny blisters with a diameter of less than 1 mm appear with varying intensity. They do not affect the function or the durability of the glass ceramic hob. Notes from the after sales service 9 Cooking This section describes how to adjust the hotplates. The table shows the heat settings and cooking times for various food dishes. The following tips help to save energy. Setting procedure Adjust the heat setting of the hotplate using the hotplate control. [. . . ] The casing may scratch the ceramic surface. Glass scraper d The blade is very sharp. Replace damaged blades immediately. 12 How to clean the glass ceramic cooking surface Use the glass scraper to remove food residues and grease splashes. Use a cleaning product and kitchen towel to clean the surface when it is luke warm. If the surface is still too hot it can become stained. [. . . ]