User manual BOSCH NMT612DTR

[. . . ] 4 Installing and removing filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cleaning and care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Replacing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Condensate can produce corrosion damage. Do not look directly into the switched on LED lights for longer than 100 seconds. Cleaning and care Risk of burns, risk of electric shock!Always leave appliance to cool down before cleaning or servicing. Caution! Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth. Surface damage due to incorrect cleaning. Clean stainless steel surfaces in the grind direction only. Do not use any stainless steel cleaners for operator controls. Surface damage due to strong or abrasive cleaning agents. Never use strong and abrasive cleaning agents. Maintenance and repair Risk of fire, risk of injury!Repairs may be performed by a qualified technician (electrician) only. Open lock and fold down the metal-mesh grease filter. Notes In doing so, place other hand under the metal-mesh grease filter. 2. Take metal-mesh grease filter out of the holder. Grease can accumulate in the bottom of the metal-mesh grease filter. ­ Do not hold metal-mesh grease filter at an angle, otherwise grease will drip out. Installing metal-mesh grease filter 1. Insert metal-mesh grease filter. In doing so, place other hand under the metal-mesh grease filter. 2. Fold up metal-mesh grease filter and lock. Cleaning and care ã=Risk of burns, risk of electric shock! from appliance. Always leave appliance to cool down before cleaning or servicing. Caution! Cleaning metal-mesh grease filters The inserted metal-mesh grease filters absorb the grease particles from the kitchen fumes. Clean the metal-mesh grease filters under normal use (1 to 2 hours daily) approx. Notes Do not use any aggressive, acidic or alkaline cleaning agents. Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth. Surface damage due to incorrect cleaning. Clean stainless steel surfaces in the grind direction only. [. . . ] The enclosed screws and wall plugs are suitable for solid brickwork. Suitable fasteners must be used for other structures (e. g. plasterboard, porous concrete, poroton bricks). weight of the extractor hood is 50 kg. 8POXIW PP Attaching upper support frame 1. [. . . ]