User manual BOSCH PBS 7 AE

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. Hold power tool by the insulated gripping surface, because the belt may contact its own power cord. Contact with a "live" wire will make exposed metal parts of the power tool "live" and shock the operator. Dust from light alloys can burn or explode. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands. 16 | English Apply the machine to the workpiece only when switched on and switch the machine off only after it has been lifted away from the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. 1 Thumbwheel for belt speed preselection (PBS 7 AE) 2 Recesses for screw clamp 3 On/Off switch 4 Lock-on button for On/Off switch 5 Dust box, complete (micro filtersystem) 6 Bolt hole 7 Adjustment screw for belt run 8 Sanding belt* 9 Holder for dust box 10 Extraction outlet 11 Latching lever for dust box 12 Filter element (micro filtersystem) 13 Clamping lever for sanding belt 14 Cover 15 Set of screw clamps* 16 Parallel and angle guide* 17 Base unit(PBS 7 AE SET) Wear protective gloves and never touch the running sanding belt. Connect the machine firmly with the base unit or the work surface, and fasten it against movement. the On/Off switch must be well-accessible at all times. Switching off the machine easily must be possible at all times. Guide the workpiece only against the switched-on machine and do not switch the machine off until after having removed the workpiece. Typically the A-weighted noise levels of the product are: Sound pressure level 89 dB(A); Sound power level 100 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. [. . . ] To switch off the machine, release the On/Off switch 3 or when it is locked with the lock-on button 4, briefly press the On/Off switch 3 and then release it. The sanding belt 8 is now loose and can be removed. Pay attention that the direction of the arrows on the inside of the sanding belt correspond with the arrow direction on the machine housing. ­ Pivot the clamping lever 13 back to its initial position. [. . . ]