User manual BOSCH PCM 10 REV 11-2007

[. . . ] The laser viewing glasses do not afford complete UV protection and reduce colour perception. Laser class Laser type C6 Tripod mount Batteries Operating life time, approx. Protect the measuring tool against moisture and direct sun irradiation. do not subject the measuring tool to extreme temperatures or variations in temperature. [. . . ] In case of large variations in temperature, allow the measuring tool to adjust to the ambient temperature before putting it into operation. Avoid heavy impact to or falling down of the measuring tool. Damage to the measuring tool can impair its accuracy. After heavy impact or shock, compare the laser line with a known horizontal or vertical reference line. switch the measuring tool off during transport. When switching off, the levelling unit, which can be damaged in case of intense movement, is locked. switching On and Off To switch on the measuring tool , push the On/Off switch 3 to the "On" position. Immediately after switching on, the measuring tool sends two laser beams out of the exit opening 1. Do not point the laser beam at persons or animals and do not look into the laser beam yourself, not even from a large distance. To switch off the measuring tool, push the On/Off switch 3 to the "Off" position. When switching off, the levelling unit is locked. Do not use the laser viewing glasses as sun glasses or in traffic. The laser viewing glasses do not afford complete UV protection and reduce colour perception. Keep the measuring tool clean at all times. Do not immerse the measuring tool into water or other fluids. Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents. Regularly clean the surfaces at the exit opening of the laser in particular, and pay attention to any fluff of fibres. If the measuring tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorized after-sales service centre for Bosch power tools. In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the measuring tool. Working with the Tripod (see figure C) A tripod 11 offers a stable, height-adjustable measuring support. Place the measuring tool via the tripod mount 8 onto the 1/4" male thread of the tripod and screw the locking screw of the tripod tight. [. . . ] Place the measuring tool via the tripod mount 8 onto the 1/4" male thread of the tripod and screw the locking screw of the tripod tight. Holding Laterally against a Wall or Object (see figure D) For quick checking of heights, the measuring tool can be held by the contact surfaces 6 laterally against a vertical wall, cabinets, etc. Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www. [. . . ]