User manual BOSCH PDA 180

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Penetration of water into the machine increases the risk of an electric shock. Avoid overheating the object being sanded as well as the sander. Always empty the dust collector before taking breaks. , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. English | 15 3 Extraction outlet 4 Sanding sheet* 5 Sanding plate 6 SDS button for release of the sanding plate 7 Vacuum hose* 8 Pad extender* 9 Sanding plate for extender* 10 Narrow pad extender* 11 Narrow rounded pad extender* The machine is intended for dry sanding and polishing of wood, plastic, metal, filler, as well as for painted surfaces. It is ist especially suitable for profiles, corners or hard to reach locations. Delta Sander Article number Rated power input Output power No-load speed No-load orbital stroke rate Sanding plate size (corner to corner) Orbit diameter Weight according to EPTA-Procedure 01/2003 Protection class W W rpm opm mm mm kg PDA 180 0 603 339 0. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted noise levels of the product are: Sound pressure level 80 dB(A); Sound power level 91 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] English | 17 To remove the sanding sheet 4, grasp it at one of the tips and pull it off from the sanding plate 5. Guide the sanding plate 5 from below against the sanding plate holder and firmly press them together. Slide the SDS button for release of the sanding plate 6 all the way to the left. , the front tip of the sanding sheet is worn, you can also remove the complete sanding plate and reattach it turned by 120°. [. . . ]