User manual BOSCH PEX 420 AE

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for dry sanding of wood, plastic, metal, filler as well as coated surfaces. Machines with electronic control are also suitable for polishing. 1 Thumbwheel for orbit frequency preselection 2 On/Off switch 3 Lock-on button for On/Off switch 4 Dust box, complete (micro filtersystem) 5 Screw for fastening the sanding plate 6 7 8 9 Sanding sheet* Sanding plate Auxiliary handle Wing bolt for adjustment of auxiliary handle 10 Allen key 11 Holder for dust box 12 13 14 15 16 Plastic slider Extraction outlet Latching lever for dust box Filter element (micro filtersystem) Extraction adapter* A complete overview of accessories can be found in our accessories program. English | 17 The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Random Orbital Sander Article number Preselection of orbital stroke rate Rated power input Output power No-load speed No-load orbital stroke rate Orbit diameter Sanding plate diameter Weight according to EPTA-Procedure 01/2003 Protection class W W min-1 min-1 mm mm 420 215 4500­13000 9000­26000 5. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted noise levels of the product are: Sound pressure level 84 dB(A); Sound power level 95 dB(A). [. . . ] Do not tilt the machine to avoid sanding through the workpiece (e. After finishing the working procedure, switch the power tool off. English | 21 Polishing For the polishing of weathered paint or buffing out scratches (e. , acrylic glass), the machine can be equipped with appropriate polishing accessories such as lamb's wool bonnet, polishing felt or sponge (accessories). [. . . ]