User manual BOSCH PHO 3100

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] This will ensure that the safety of the power tool is maintained. Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury. Do not reach into the saw dust ejector with your hands. Otherwise there is danger of kickback when the cutting tool jams in the workpiece. When working, always hold the planer in such a manner that the planer base plate faces flat on the workpiece. Otherwise the planer can become wedged and lead to injuries. never plane over metal objects , nails or screws. The planer blade and the blade shaft can become damaged and lead to increased vibrations. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Take protective measures when dust can develop during working that is harmful to one's health, combustible or explosive. example: Some dusts are regarded as carcinogenic. Wear a dust mask and work with dust/chip extraction when connectable. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Planer Article number Rated power input Output power No-load speed Planing depth Rebating depth Planing width, max. Weight according to EPTA-Procedure 01/2003 Protection class W W rpm mm mm mm kg PHO 3100 3 603 B71 . 1 Planing depth scale 2 Depth adjustment knob 3 Chip ejector (alternatively right/left) 4 Lock-off button for On/Off switch 5 On/Off switch 6 Belt cover 7 Screw for belt cover 8 Chip ejection selector lever 9 Planer base plate 10 V-grooves 11 Blade drum 12 Clamping element for blade 13 Fastening screw for planer blade 14 Carbide blade (TC) 15 Allen key 16 Extraction hose (Ø 35 mm)* 17 Chip/dust bag* 18 Parallel guide 19 Scale for rebating width 20 Locking nut for adjustment of rebating width 21 Fastening bolt for parallel and beveling guide 22 Angle stop* 23 Locking nut for angle adjustment 24 Fastening bolt for rebating depth stop 25 Rebating depth stop* For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. [. . . ] The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V. Switching On and Off To start the machine, first push the lock-off button for the On/Off switch 4 and then press the On/Off switch 5 and keep it pressed. To switch off the machine, release the On/Off switch 5. [. . . ]