User manual BOSCH PIB 672E14E/20

[. . . ] 6 The control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 The hotplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Programming the hob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching the hob on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Adjusting the hotplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Cooking guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Childproof lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Activating and deactivating the childproof lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Activating and deactivating the childproof lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 The Powerboost Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Restrictions when using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] However, an empty pan may heat up so quickly that the "automatic switch off" function may not have time to react and the pan may reach very high temperatures. The base of the pan could melt and damage the glass on the hob. In this case, do not touch the pan and switch the hotplate off. If it fails to work after it has cooled down, please contact the Technical Assistance Service. Pan detection Each hotplate has a minimum limit for detecting pans, which varies depending on the material of the pan being used. You should therefore use the hotplate that is most suitable for the diameter of your pan. Double or triple hotplate These hotplates can detect pans of different sizes. Depending on the material and properties of the pan, the hotplate will adapt automatically, switching on part or all of the hotplate and supplying sufficient power to obtain good cooking results. Time savings for cooking and frying; since the pan is heated directly. Foods that have spilt do not burn as quickly. Heat and safety control; the hob supplies or cuts off power immediately when the control knob is turned on. The induction hotplate stops supplying heat if the pan is removed without having previously switched it off. Suitable pans Ferromagnetic pans Only ferromagnetic pans are suitable for induction cooking, these may be made from: enamelled steel cast iron special cutlery for stainless steel induction pan To determine whether a pan is suitable, check to see if a magnet will stick to it. The > indicator is no longer displayed and the hotplate returns to power level S. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. S. *URXS *URXS *URXS *URXS Time programming function This function may be used in two different ways: Changing or cancelling the time Press the 0 symbol several times until the required x indicator lights up. Change the cooking time using the + or symbols, or set to <<. Notes If a cooking time has been programmed in several zones, it can be set to display all time values. To do this, press the 0 symbol several times until the x indicator for the required hotplate lights up. to automatically switch off a hotplate. as a timer. To switch a cooking zone off automatically Enter the cooking time for the required hotplate. It will turn off automatically when the time has lapsed. The x indicator of the hotplate lights Cooking times of up to 99 minutes can be programmed. up. << appears in the time program function display. To select a hotplate, press the 0 symbol several times until the x indicator for the required hotplate lights up. [. . . ] Then press any symbol on the hob. * the corresponding hotplate has been switched off. The electronic system has overheated and all hotplates have been switched off. Supply voltage outside normal operating limits. Please contact the local electricity board. The hotplate has overheated and switched Wait until the electronic system has cooled down sufficiently before off to protect its working surface. [. . . ]