User manual BOSCH PIE611T14E

[. . . ] Hob [en] Instruction manual 3, (7 ‘  ‘  3, %( ‘  ‘  ‘  ‘  ‘  ‘  3, /7 ‘  ‘  ‘  ‘  Ú Table of contents nso[en]Itruimnctla Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Elements that may damage the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protecting the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmentally-friendly disposal of waste products . . . . . . . . . . . . . . . . . . . 5 Energy-saving advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Induction cooking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Advantages of induction cooking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Suitable pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Familiarise yourself with the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Foods that have spilt do not burn as quickly. Heat and safety control; the hob supplies or cuts off power immediately when the control knob is turned on. The induction hotplate stops supplying heat if the pan is removed without having previously switched it off. enamelled steel cast iron special cutlery for stainless steel induction pan ■ ■ ■ To determine whether a pan is suitable, check to see if a magnet will stick to it. 5 Other suitable cookware for induction There are other types of cookware especially made for induction whose base is not entirely ferromagnetic. When using large cookware on a smaller ferromagnetic zone, only the ferromagnetic zone heats up, so heat might not be uniformly distributed. Cookware with aluminium on the base reduce the ferromagnetic zone, so less heat may be supplied or be difficult to detect. For good cooking results, the diameter of the cookware's ferromagnetic area should match the size of the hotplate. If cookware is not detected on a hotplate, try it on the next smaller hotplate down. Unsuitable pans Never use pans made from: ■ ■ ■ ■ ■ Characteristics of the pan base The characteristics of the pan base may affect the uniformity of the cooking results. Pans made from materials which help diffuse heat, such as stainless steel sandwich pans, distribute heat uniformly, saving time and energy. Absence of pan or unsuitable size If no pan is placed on the selected hotplate, or if it is made of unsuitable material or is not the correct size, the power level displayed on the hotplate indicator will flash. Use only cookware suitable for induction cooking; see the "Suitable cookware" section. Residual heat indicator The hob has a residual heat indicator for each hotplate to show those which are still hot. Avoid touching a hotplate that displays this. Even when switched off, the œ/• light will remain on as long as the hotplate remains hot. If the pan is removed before the hotplate is turned off the œ/ • indicators and the selected power level will appear alternately. Programming the hob This section will show you how to program the hotplates. The table contains power levels and cooking times for several dishes. To select the power level: The hob must be switched on. 1. Press the + or - symbol of the required hotplate and its Switching the hob on and off The hob is turned on and off using the main switch. The indicator above the main switch lights up. To turn off: press the % symbol until the indicator above the main switch disappears. The residual heat indicator stays lit until the hotplates have cooled off. Note: The hob switches off automatically when all the hotplates are switched off for more than 20 seconds. display lights up ‹. 2. In the following 10 seconds, press the + or - symbol. - symbol = power level 4.   Set the hotplate Select the required power level with the + and - symbols. [. . . ] Please contact the local electricity board. The hotplate has overheated and switched Wait until the electronic system has cooled down sufficiently before off to protect its working surface. switching it back on. * If the warning persists call the Technical Assistance Service. Do not place hot pans on the control panel. 11 Normal noise while the appliance is working Induction heating technology is based on the creation of electromagnetic fields that generate heat directly at the base of the pan. Depending on how the pan has been manufactured, these may produce certain noises or vibrations such as those described below: A deep humming sound as in a transformer This noise is produced when cooking on a high power level. [. . . ]