User manual BOSCH PIF687T01E

[. . . ] EN Instruction manual 3 G . Table of contents Important information . 5 5 5 8 Familiarising yourself with the appliance . 10 11 12 The cooking with Induction . 12 13 Main switch with childproof lock . [. . . ] The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the - and + symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. Touch the - or + symbol. The default value appears. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. The cooking time flashes for several seconds and then disappears. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. 21 When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. A 0 appears in the heat setting indicator. 00 flashes in the timer indicator and the 1 indicator flashes. Touch the - and + switches of the Timer functions at the same time. You should do this several times until the 1 symbol flashes. Now you will be able to set the time with the - or + switches. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Set the timer function to 00 using the - symbol. The indicator goes out after a few seconds. If you would like to call up the remaining cooking time for a hotplate: Touch the - and + symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The cooking time is displayed for 5 seconds. Automatic time limit can also be activated using the timer function. The timer function is no longer active after a power cut. Changing prematurely Cancelling prematurely Notes Cooking timer Setting procedure You can use the timer on your cooker to set a time of up to 99 minutes. It runs independently of all the other settings. 1. Touch the - and + symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. [. . . ] The hob is therefore fitted with a fan which runs at various speeds according to the temperature detected. The fan may also run on once the hob has been switched off if the temperature it detects is still too high. The noises described are normal and part of the induction technology and do not indicate a fault. Low humming like a transformer Quiet whistling Crackling High pitched whistle Fan noise 31 Packaging and old appliances Disposing in an environmentally responsible manner Unpack the appliance and dispose of the packaging in an environmentally responsible manner. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European wide validity of return and recycling on Waste Electrical and Electronic Equipment. After sales service Our after sales service is there for you if your hob should need to be repaired. [. . . ]