User manual BOSCH PIL975L34E

[. . . ] EN Instruction manual PIL. 75L34E Ø 18/28 Ø 14, 5 Ø 21/26/32 Ø 14, 5 Ø 21 Ø 18 Ø 14, 5 Ø 18 Ø 18 Ø 14, 5 Ø 18 Ø 18/28 Ø 21 Ø 18 Ø 21/26/32 Ø 21 Ø = cm Table of contents Safety information . 10 10 Getting to know your appliance . 18 Saucepans for the sensor cooking system . Table showing cooking times for the cooking sensor . [. . . ] The fat would otherwise cool too quickly. Example: frozen chips: 1. 5 l fat, approx. 150 g chips per portion. Unsuitable fat Heating the fat Deep frying Cooking in a pressure cooker Add liquid according to the manufacturer's instructions. Bring pulses to the boil in the 95-100 ºC temperature range. Skim off the froth and seal the pressure cooker. Continue to cook in the 110-120 ºC temperature range. 24 Cooking programs The cooking programs can be used to prepare the following groups of dishes: Food Soups Side dishes Eggs Fish Meat Vegetables Pulses and legumes Sweet foods Drinks Pressure cooker Fried food Selecting the required cooking program Select the cooking zone. 1. Place the food in the pan and add liquid, just two fingers is enough. 2. Place the pan in the centre of the cooking zone and cover it. 3. Select the required cooking zone. 0. 0 will appear on the cooking zone display. 4. Press the corresponding cooking sensor first. Cooking Sensor is activated. If the ÔÜ sensor is pressed before the cooking sensor, an alert will appear on the display. 5. Press the ÔÜ symbol to access the menu. In the next 10 seconds, select the Programmes option using the + and - symbols. 6. Move to the next line using navigation sensor X and select the required group of dishes using the + and - symbols. 25 7. Then move to the next line using navigation sensor X and select the required dish using the + and - symbols. 8. Activate the function by pressing ÔÜ. The temperature symbol remains lit until the required temperature is reached. The temperature symbol will go out and an alert will appear on the display. The Cooking Sensor will maintain the pan within the set temperature range. Changing the selected program Select the cooking zone. Return to the function menu using the ÔÜ symbol. Then move to the next line using navigation sensor X and select the required dish using the + and - symbols. Cover the cooking sensor so that the lens remains clean. Switching off the Cooking Sensor Cooking advice Food frozen in a block Place the frozen food in the recipient, for example, spinach. . Add liquid according to the manufacturer's instructions. [. . . ] If the indication continues, notify the Technical Assistance Service. Wait until the electronic system has cooled down sufficiently. If the indication continues, notify the Technical Assistance Service. There is an internal error in the system F2 The electronic system has overheated and the corresponding cooking zone has been switched off 44 Display F4 Malfunction The electronic system has overheated and all the cooking zones have been switched off Incorrect supply voltage, outside normal operating limits The cooking zone has overheated and has switched off in order to protect the hob Measure Wait until the electronic system has cooled down sufficiently. If the indication continues, notify the Technical Assistance Service. [. . . ]