User manual BOSCH PKS 66 AF

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] Be aware of the time it takes for the blade to stop after switch is released. Do not reach into the saw dust ejector with your hands. they could be injured by rotating parts. In this manner you do not have sufficient control over the power tool. English | 21 Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock. Do not operate the power tool stationary. It is not designed for operation with a saw table. Do not use high speed steel (HSS) saw blades. When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. 1 Lock-off button for On/Off switch 2 On/Off switch 3 Auxiliary handle 4 Spindle lock button 5 Scale for mitre angle 6 Allen key 7 Wing bolt for bevel-angle preselection 8 Wing bolt for parallel guide 9 "CutControl" ­ Viewing window for cutting line (PKS 55 A/PKS 66 A/PKS 66 AF) 10 Parallel guide 11 Retracting blade guard 12 Base plate 13 Lever for retracting blade guard 14 Wing bolt for bevel-angle preselection 15 Blade guard 16 Sawdust ejector 17 Clamping bolt with washer 18 Clamping flange 19 Saw blade* 20 Mounting flange 21 Saw spindle 22 Vacuum hose* 23 Deflection tube for chips 24 Dust/chip box* 25 Slider of dust/chip box 26 Clamping lever for cutting-depth preselection 27 Cutting-depth scale 28 Cutting mark, 45° 29 Cutting mark, 0° 30 Quick-action clamp* 31 Guide rail* 32 Button for guide-rail lock *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] Take care that the cam on the inside of the screw clamp 30 is seated in the corresponding recess of the guide rail 31. Before any work on the machine itself, pull the mains plug. For safe and proper working, always keep the machine and ventilation slots clean. The retracting blade guard must always be able to move freely and retract automatically. [. . . ]