User manual BOSCH PRIVATE COLLECTION TKA6003V

[. . . ] cluttered or dark areas invite accidents. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C) Keep children and bystanders away while operating a power tool. [. . . ] Liquid ejected from the battery may cause irritation or burns. 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Penetration of water into the machine increases the risk of an electric shock. Avoid overheating the object being sanded as well as the sander. Always empty the dust collector before taking breaks. , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. ) as well as during its transport and storage, lock the On/Off switch in the off position. Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions. A complete overview of accessories can be found in our accessories program. Typically the A-weighted sound pressure level of the product is 76 dB(A). The noise level when working can exceed 80 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. [. . . ] When attaching a new sanding sheet, remove any dust or debris from the sanding plate 4 (e. To ensure optimum dust extraction, pay attention that the punched holes in the sanding sheet match with the holes in the sanding plate. The sanding plate 4 is fitted with Velcro backing for quick and easy fastening of sanding sheets with Velcro adhesion. Before attaching the sanding sheet 3, free the Velcro backing of the sanding plate 4 from any debris by tapping against it in order to enable optimum adhesion. [. . . ]