User manual BOSCH PSB 530 RA

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] 18 | English Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting. Typically the A-weighted noise levels of the product are: Sound pressure level 97 dB(A); Sound power level 108 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah =4. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. 1 Keyless chuck 2 Spindle lock button(PSB 600 RE/ PSB 650 RE/PSB 650 RA) 3 "Drilling/Impact Drilling" selector switch 4 Rotation direction indicator(PSB 600 RE/ PSB 650 RE/PSB 650 RA) 5 Lock-on button for On/Off switch 6 On/Off switch 7 Thumbwheel for speed preselection (PSB 600 RE/PSB 650 RE/PSB 650 RA) 8 Rotational direction switch 9 Extraction device with dust collector and depth stop * 10 Wing bolt for adjustment of auxiliary handle * 11 Auxiliary handle* 12 Telescopic guide with depth stop scale * 13 Set collar for depth stop* 14 Release button for dust collector * 15 Dust collector* English | 19 An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Impact Drill Article number Rated power input Output power No-load speed Rated speed Impact rate Rated torque Torque at max. Output power Speed preselection Right/left rotation Spindle lock Dust extraction Spindle collar dia. ­ Concrete ­ Steel ­ Wood ­ with extraction device mounted Chuck clamping range Weight according to EPTA-Procedure 01/2003 ­ with extraction device ­ without extraction device Protection class mm mm mm mm mm mm 43 13 10 20 13 2. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. [. . . ] Light pressure on the On/Off switch 6 results in low speed/impact rate. further pressure on the switch increases the speed/impact rate. Preselecting the Speed/Impact Frequency (PSB 600 RE/PSB 650 RE/PSB 650 RA) With the thumbwheel for speed preselection 7, the required speed/impact frequency can be preselected even during operation. The required speed/impact frequency depends on the material and the working conditions, and can be determined through practical testing. [. . . ]