User manual BOSCH PSB 850-2 RE

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. 1 Depth stop 2 Keyless chuck 3 Button for depth stop adjustment 4 "Drilling/Impact Drilling" selector switch 5 Thumbwheel for electronic speed preselection (PSB 1000-2 RCE/PSB 1000-2 RCA) 6 Indicator for right rotation 7 Indicator for left rotation 8 Lock-on button for On/Off switch 9 Rotational direction switch 10 On/Off switch 11 Gear selector 12 Auxiliary handle 13 Wing bolt for adjustment of auxiliary handle 14 Extraction device with dust collector * 15 Dust collector* 16 Thumbwheel for speed preselection (PSB 850-2 RE/PSB 850-2 RA) 17 Release button for dust collector * 18 Filter element (micro filtersystem) * 19 Rubber gasket for dust collector * 20 Dust protection ring* 21 Release button for extraction device * 22 Clamp for extraction device * 23 Locking latch for dust collector* 24 Universal bit holder* 25 Screwdriver bit* 26 Allen key ** *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting. Impact Drill Article number Rated power input Output power No-load speed ­ 1st gear ­ 2nd gear Rated speed ­ 1st gear ­ 2nd gear Impact rate ­ 1st gear ­ 2nd gear Rated torque ­ 1st gear ­ 2nd gear Torque at max. output power ­ 1st gear ­ 2nd gear Speed preselection Constant electronic control Right/left rotation Dust extraction Fully automatic spindle locking (Auto-lock) Spindle collar dia. Maximum drilling diameter (1st/2nd gear) ­ Brickwork ­ Concrete ­ Steel ­ Wood ­ with extraction device mounted Chuck clamping range Weight according to EPTA-Procedure 01/2003 ­ with extraction device ­ without extraction device Protection class mm 43 43 43 43 ­ ­ ­ ­ PSB . For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted noise levels of the product are: dB(A) Sound pressure level dB(A) Sound power level dB Uncertainty K= Wear hearing protection!Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah Uncertainty K= Impact drilling into concrete: Vibration emission value ah Uncertainty K= Screwdriving without impact: Vibration emission value ah Uncertainty K= Tapping: Vibration emission value ah Uncertainty K= The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. [. . . ] the indicator for right-hand rotation 6 indicates the selected rotational direction. Left Rotation: For loosening and unscrewing screws and nuts, press the rotational direction switch 9 through to the right stop. The selector switch 4 engages noticeably and can also be actuated with the machine running. English | 25 Electronic Speed Preselection (PSB 1000-2 RCE/PSB 1000-2 RCA) With the thumbwheel for electronic speed preselection 5, the required speed/impact frequency can be selected even if the machine is running. [. . . ]