User manual BOSCH PSE 180 E REV 3-2009

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] Use extreme caution when handling blades. Conduct the mains cable to the rear away from the power tool. Damage to the cable from sharp application tools can lead to electric shock. When working, wear safety goggles and protective gloves. Danger of injury from chipping off or thrown about material particles. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. English | 15 The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Electric scraper Article number Rated power input Stroke rate at no load n0 Stroke Weight according to EPTA-Procedure 01/2003 Protection class W PSE 180 E 0 603 316 7. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for partial removal and scraping off of flooring material, adhesive, paint or filler remainders, for smooting out irregularities, as well as for carving soft wood. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted sound pressure level of the product is 75 dB(A). The noise level when working can exceed 80 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. 1 Blade* 2 Tool holder 3 Dust protection cap 4 On/Off switch with stroke rate preselection 5 Tool-lock button 6 Blade cover for extra-sharp blades *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. [. . . ] Wide application tools are for large-scale revomal; narrow application tools are for spot-removal (especially at hard to reach locations). Carbide (TC) application tools provide longer service life than steel application tools. Wood) can easily be damaged when working with extra-sharp blades. 18 | English Possible Applications: ­ Removing of carpet adhesive, carpet foam or hard foam remainders, plaster, gypsum and mortar remainders, as well as putty and grout ­ Evening out or levelling irregularities (e. [. . . ]