User manual BOSCH PSR 10,8 LI

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] When the battery is defective, liquid can escape and come into contact with adjacent components. Clean such parts or replace them, if required. Keep the battery charger away from rain or moisture. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. English | 39 Before each use, check the battery charger, cable and plug. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. Do not operate the battery charger on easily inflammable surfaces (e. The heating of the battery charger during the charging process can pose a fire hazard. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. Use the machine only when you can fully assess all functions and handle them without limitation, or after having received appropriate instructions. 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Indicator for right rotation 5 Battery charge-control indicator 6 Indicator for left rotation 7 "Power Light" 8 Rotational direction switch 9 On/Off switch 10 Battery charger 11 Universal bit holder* 12 Securing screw for keyless chuck 13 Allen key* *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Cordless Drill/Driver Article number Rated voltage No-load speed Max. ­ Steel ­ Wood Chuck clamping range Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Article number 2 607 225 489 (EU) 2 607 225 491 (UK) 2 607 225 611 (AUS) Charging time h 3. [. . . ] If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard. If the machine should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for Bosch power tools. In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. [. . . ]