User manual BOSCH PSR 14.4 LI

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. the vapours can irritate the respiratory system. When the battery is defective, liquid can escape and come into contact with adjacent components. Clean such parts or replace them, if required. Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Indicator for right rotation 5 Indicator for left rotation 6 Battery 7 "Power Light" 8 Battery charge-control indicator 9 Rotational direction switch 10 On/Off switch 11 Battery unlocking button 12 Universal bit holder* 13 Securing screw for keyless chuck 14 Allen key* Cordless Screwdriver Article number Rated voltage No-load speed Max. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). The noise level when working can exceed 80 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. [. . . ] In all correspondence and spare parts order, please always include the 10-digit article number given on the type plate of the machine. The 3 LEDs of the battery charge-control indicator 8 and the Power Light 7 flash rapidly when the battery temperature is not within the operting temperature range of ­10 to +70°C. Temperature Dependent Overload Protection When using as intended for, the power tool cannot be subject to overload. When the load is too high or the allowable battery temperature of 70 °C is exceeded, the electronic control switches off the power tool until the temperature is in the optimum temperature range again. [. . . ]