User manual BOSCH PSR 14.4 LI-2

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] When the battery is defective, liquid can escape and come into contact with adjacent components. Clean such parts or replace them, if required. Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Gear selector 5 Indicator for right rotation 6 Indicator for left rotation 7 Battery* 8 "Power Light" 9 Battery charge-control indicator 10 Rotational direction switch 11 On/Off switch 12 Battery unlocking button 13 Universal bit holder* 14 Securing screw for keyless chuck 15 Allen key* *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Cordless Drill/Driver Article number Rated voltage No-load speed ­ 1st gear ­ 2nd gear Max. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted sound pressure level of the product is 70 dB(A). The noise level when working can exceed 80 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah =2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. [. . . ] Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www. Com Our customer consultants answer your questions concerning best buy, application and adjustment of products and accessories. ) as well as during transport and storage, set the rotational direction switch to the centre position. [. . . ]