User manual BOSCH PSR 18 LI-2

[. . . ] Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. E) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [. . . ] Wear a dust mask and work with dust/chip extraction when connectable. Dust from light alloys can burn or explode. Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. the vapours can irritate the respiratory system. When the battery is defective, liquid can escape and come into contact with adjacent components. Clean such parts or replace them, if required. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic. 1 Screwdriver bit* 2 Keyless chuck 3 Torque preselection ring 4 Gear selector 5 Indicator for right rotation 6 Indicator for left rotation 7 Soft grip 8 Battery* 9 "Power Light" 10 Battery charge-control indicator 11 Rotational direction switch 12 On/Off switch 13 Battery unlocking button 14 Universal bit holder* 15 Securing screw for keyless chuck 16 Allen key* We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 89/336/EEC, 98/37/EC (until Dec. Cordless Screwdriver Article number Rated voltage No-load speed ­ 1st gear ­ 2nd gear Max. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted sound pressure level of the product is 70 dB(A). The noise level when working can exceed 80 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah =2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] ) as well as during transport and storage, set the rotational direction switch to the centre position. unintentional actuation of the On/Off switch can lead to injuries. For safe and proper working, always keep the machine and ventilation slots clean. When the battery is no longer operative, please refer to an authorised after-sales service agent for Bosch power tools. [. . . ]