User manual BOSCH PSR SELECT

[. . . ] Book Page 22 Thursday, December 15, 2011 8:36 AM 22 | English English Safety Notes General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. [. . . ] product Description and Specifications Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. intended Use The machine is intended for driving in and loosening screws. Product Features The numbering of the product features refers to the illustration of the machine on the graphics page. Book Page 27 Thursday, December 15, 2011 8:36 AM English | 27 3 4 5 6 7 8 9 10 11 12 13 14 15 Viewing window Indicator for right rotation Battery charge-control indicator Indicator for left rotation Sliding switch for bit changing Rotational direction switch Socket for charge connector On/Off switch Bit magazine “PowerLight” Handle (insulated gripping surface) Charge connector Battery charger *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Technical Data Cordless Screwdriver Article number Rated voltage No-load speed Max. Torque for hard/soft screwdriving application according to ISO 5393 Max. 5 1 V= min-1 Nm mm kg Ah Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Book Page 28 Thursday, December 15, 2011 8:36 AM 28 | English Cordless Screwdriver Battery Charger Article number Charging time Protection class PSR Select 2 609 003 263 (EU) 2 609 003 265 (UK) h 4 /II Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Noise/Vibration Information Measured sound values determined according to EN 60745. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). The noise level when working can exceed 80 dB(A). Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745: Screwdriving without impact: ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. [. . . ] Book Page 37 Thursday, December 15, 2011 8:36 AM Français | 37 When removing the battery from the machine, actuate the On/Off switch 10 until the battery is completely discharged. Unscrew the screw in the casing and take off the casing shell. Disconnect the connections on the battery and remove the battery. Un chargeur qui est adapté à un type de bloc de batteries peut créer un risque de feu lorsqu’il est utilisé avec un autre type de bloc de batteries. [. . . ]