User manual BOSCH PSR1440

[. . . ] damaged or entangled cords increase the risk of electric shock. ς When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. ς If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. [. . . ] If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.  Use the power tool , accessories and tool bits etc. In accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. ς Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. damaging a gas line can lead to explosion. Penetrating a water line causes property damage. Liquid ejected from the battery may cause irritation or burns. Additional Safety and Working Instructions  Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health and cause allergic reactions, lead to respiratory infections and/or cancer. Materials containing asbestos may only be worked by specialists. € Provide for good ventilation of the working place. – It is recommended to wear a P2 filter-class respirator. Observe the relevant regulations in your country for the materials to be worked. ς Before any work on the machine (e. Unintentional actuation of the On/Off switch can lead to injuries.  The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using for the first time. ς Read the operating instructions of the battery charger. [. . . ] Sound emission values determined according to EN 60745-2-1. vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745. The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. [. . . ]