User manual BOSCH PSS 200 AC

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Penetration of water into the machine increases the risk of an electric shock. Avoid overheating the object being sanded as well as the sander. Always empty the dust collector before taking breaks. , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. damaged cables increase the risk of an electric shock. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1 Thumbwheel for orbit frequency preselection(PSS 250 AE) 2 On/Off switch 3 Dust box, complete (micro filtersystem) 4 Sanding-sheet clamp (PSS 190 AC/PSS 200 AC/PSS 250 AE) 5 Sanding plate 6 Sanding sheet 7 Handle (insulated gripping surface) 8 Extraction outlet 9 Filter element (micro filtersystem) 10 Vacuum hose* 11 Perforating tool* *Accessories shown or described are not part of the standard delivery scope of the product. [. . . ] From rolls or by the meter, can be punctured with the perforating tool 11 for use with dust extraction. For this, press the machine with the mounted sanding sheet onto the perforating tool (see figure E). to remove the sanding sheet 6 , unlatch the sanding-sheet clamp 4 and pull out the sanding sheet. Selecting the Sanding Sheet Depending on the material to be worked and the required rate of material removal, different sanding sheets are available: Grain size 40--240 For the working of all wooden materials For coarse-sanding, e. [. . . ]