User manual BOSCH PSS 280

[. . . ] Book Page 13 Monday, December 3, 2007 12:54 PM English | 13 General Power Tool Safety Warnings en WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. [. . . ] Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Book Page 15 Monday, December 3, 2007 12:54 PM English | 15 Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. Technical Data Orbital sander Article number Rated power input Preselection of orbital stroke rate No-load speed Orbital stroke rate Orbit diameter Sanding sheet dimensions — Adhesion via Velcro backing — Attachment via clamping Sanding plate dimensions Weight according to EPTA-Procedure 01/2003 Protection class rpm mm 7000 – 12000 1. 8 opm 14000 – 24000 W PSS 300 AE 3 603 C40 3. 250 Product Features The numbering of the product features refers to the illustration of the machine on the graphics page. 1 Thumbwheel for orbit frequency preselection 2 On/Off switch 3 Dust box, complete (micro filtersystem) 4 Sanding-sheet clamp 5 Sanding plate 6 Sanding sheet 7 Extraction outlet 8 Filter element (micro filtersystem) 9 Vacuum hose* 10 Perforating tool* 11 Screws for sanding plate *The accessories illustrated or described are not included as standard delivery. mm mm mm 115 x 230 115 x 280 115 x 230 kg 1. 9 / II The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. noise/Vibration Information Measured values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 84 dB(A); Sound power level 95 dB(A). Book Page 16 Monday, December 3, 2007 12:54 PM 16 | English The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. [. . . ] Guide the sanding sheet 6 under the opened rear sanding-sheet clamp 4 to the stop and clamp the sanding sheet by reinserting the sanding-sheet clamp 4. Fold the sanding sheet 6 firmly around the sanding plate. Guide the other end of the sanding sheet 6 under the front sanding-sheet clamp 4 and clamp the sanding sheet by reinserting the sanding-sheet clamp 4. Important instructions for connecting a new 3-pin plug to the 2-wire cable. [. . . ]