User manual BOSCH PSS 300 AE

[. . . ] Do not use any adapter plugs with earthed (grounded) power tools. unmodified plugs and matching outlets will reduce risk of electric shock. B) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. [. . . ] 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Penetration of water into the machine increases the risk of an electric shock. Avoid overheating the object being sanded as well as the sander. Always empty the dust collector before taking breaks. , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. Orbital sander Article number Rated power input Preselection of orbital stroke rate No-load speed Orbital stroke rate Orbit diameter Sanding sheet dimensions -- Adhesion via Velcro backing -- Attachment via clamping Sanding plate dimensions Weight according to EPTA-Procedure 01/2003 Protection class rpm mm 7000 ­ 12000 1. 1 Thumbwheel for orbit frequency preselection 2 On/Off switch 3 Dust box, complete (micro filtersystem) 4 Sanding-sheet clamp 5 Sanding plate 6 Sanding sheet 7 Extraction outlet 8 Filter element (micro filtersystem) 9 Vacuum hose* 10 Perforating tool* 11 Screws for sanding plate For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Typically the A-weighted noise levels of the product are: Sound pressure level 84 dB(A); Sound power level 95 dB(A). 16 | English The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. [. . . ] A sanding sheet that has been used for metal should not be used for other materials. The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V. Switching On and Off To start the machine, push the On/Off switch 2 towards the front to "I". [. . . ]